10 Litre Wax Melting Pot

£109.99

£165.00

Temperature controlled wax melter with pouring spout. Perfect for small to medium sized wax operations.

If you are tired of standing over your kitchen cooker or using a double boiler its time to upgrade and speed up your candle making process. Make larger batches, faster giving you more time to focus on selling!

How it Works

Video Coming Soon!

Features

Specifications:

Plug in - no need for a cooker
Direct Heat - no need for water
Easy pouring spout
Max Capacity: 10 Litres
Power: 400watt (UK plug as standard)
Size 330mm diameter x 330mm height
Unfilled Weight: 3kg approx

Also Includes:

Glass Lid to keep free of debris when not in use
External Thermo plug for more consistent temperature control

Temperature Range: 35-80 degrees Celsius - Please note temperature is indicative only and should be verified with a secondary thermometer. The melter should be adjusted if the temperature is too high or low.

A Thermo plug is a power control device with a thermometer built in. You place the thermometer in the wax, when the thermometer reached the set temperature (for instance 60C) the power will shut off. when the thermometer reaches the second temperature (59C) it will turn back on, keeping your wax between 59-60C

Downloads

Wax Melter Operation Guide (PDF)

Quality

Choose your discovery fragrance oil pack (free gift!)

Specification
Volume	10 litres of melted wax
Thermostat	400w mid height ring element
Size:	330mm x 330mm
Weight:	3kg (un-filled)
Heating Type:	Direct (no water required)

Our wax melters have not one, but two thermostat controls The one on the main body, and the external thermostat which offers a more accurate reading of the actual wax temperature within the melter.

The user must take into account that all thermostats have a tolerance of temperature readings, which may mean the wax temperature may be a some degrees different to that shown on the external or vessel thermostat (usually within 5 degrees but on occasion higher) . This is normal, and the user should test thermostat settings to ensure their own required wax temperature is reached.

User should take into account that latent residual heat will cause the wax temperature to continue to lift even after the vessel heat band is switched off by either thermostat. This may mean the user should set their temperature lower than the desired temp if burning may be an issue.

If using the external Thermoplug, set the temperature on the Thermoplug to your required melt temperature as per the instrucsons, and the video support on our website. The thermostat on the wax melter itself should be set to maximum as the external Thermoplug will be controlling the actual working temperature of the wax.

Please remember, that although the Thermoplug is highly accurate, even when it switches the heat band off, latent heat within the wax melter wall may increase the temperature of the wax by a few degrees. This is normal and something the user must take into considerason. Consider setting your temperature 10 degrees lower for initial testing and then raising slowly until the preferred temperature is achieved.

Users can also benefit from our guidance videos, and if still unsure are welcome to seek our advice though our contact facility on the website.

Returns Policy
We will only accept returns and offer refunds for faulty wax melters, if confirmed by our testing.

Any returns postage - including cost will be the users responsibility, and can be refunded if a faulty wax melter diagnosis is agreed by SimplyScented

If the user simply has changed their mind, we will fully refund on receipt of the wax melter (carriage costs borne by the user), in an unused resalable condition with all ancillary equipment present, unused, including any sets of fragrance oils, and in its original box. All refunds must be requested and Wax Melter returned to SimplyScented within 30days.

Return Address: 19 Sheerwater Drive, Northampton, NN3 5HU, England

Feature 01: Keeping it Clean

glass lid included as standard to stop debris entering your wax when not in use

Feature 03: Easy Pouring

Heavy duty spout inbuilt to allow for easy and mess free pouring of molten wax into your pitcher

Feature 02: Energy Saving

Double walled aluminium body to minimise heat loss and increase user safety

Feature 04: Consistent Heating

Ring heat element to enable consistent heating

Feature Video

Check out all the features and benefits of the Simply Scented Wax Melter 3.0

Set Up Guide

Set up your melter with me and learn some tips and tricks along the way

Absolute life saver!!

It’s amazing! Holds so much wax and really makes life so much easier! Been tempted to buy another

Chantelle - Melt Maker Supreme

A Great Time Saver

Having just opened a shop I really needed to increase my candle production and this wax melter is perfect. It’s an excellent size, easy to use and great value.

Louise - Happy Customer

Highly Recommended!

We have a couple of imelts and were going to purchase another to help with xmas orders but... we just couldn’t get one as they were always sold out. We came across these and decided to try one out. They are GREAT! We’ve already bought another they are that good! HIGHLY RECOMMENDED

George - Simply Scented Convert

Why we designed the Simply Scented Melter 3.0

Let me start by saying that I, like many of you also started my journey making wax melts over the kitchen hob - I feel your pain!

It became obvious pretty quickly that i was spending WAY too much time watching small amounts of wax melt and not enough time doing all the other jobs that running a small business requires.

We tried other wax melters and well they were either incredibly expensive or they didnt work very well.

Here's what we learnt.

Wax melters with a wattage of 800 or above melt the wax too fast and can cause them to burn.

So we made ours 400w

Melters that have a bottom mounted element can burn the wax especially if it has set and has to be re-melted.

So we put our heating ring in the middle.

And finally we wanted to make sure that the temperature remained as stable as possible. So we added a secondary measure to keep everything on track!